Elite Screens launches new company devoted to its AirFlex5D Multi-Projector Stacking System
The Airflex5D system is a 2D/3D projector stacking system that precisely aligns the images of multiple projectors vertically and horizontally into one single picture with amplified brightness. It can accommodate up to a 1920×1200 resolution projector with dual-channel geometric image correction and support de-interlacing, scaling and image enhancement.
High-end 1080P projectors that produce 10000+ lumens can be upwards of $50K to $80K or more. When breaking down the cost-to-performance, this is about $5-8 per lumen in picture brightness. However, with an AF5D-5S system, you can get similar results by using a combination of 4x standard 3000 lumen projectors with a pair of AF5D-5S stacking processors and get similar results while paying on average below $1 per lumen.
The AirFlex5D system also ensures that there is no down time if one lamp goes out because the other 3 will remain operational. As an environmentally conscious and power-saving advantage, the AirFlex5D Multi-Projector Stacking System can achieve vivid picture brightness using one projector at night or 4 projectors against the ambient lighting of daytime presentations.
ADVERTISEMENT
Another great feature for a pair of projectors using the AirFlex AF5D-5S is that it can provide a theatre-grade Passive 3D performance when combined with Elite’s AirBright3D2 screen material. Geometric image correction is essential for commercial presentations that utilise an uneven projection surface. This feature of the AF5D-5S is crucial in projecting on extreme curved or dome screen projection arrays.
The AirFlex AF5D-5S is a ground breaking design that pairs cost effectiveness with simplicity as a single-box solution to double (or 4X, 8X…etc) the Brightness in 2D, or passive 3D projected images.
-
ADVERTISEMENT
-
ADVERTISEMENT
-
ADVERTISEMENT
-
ADVERTISEMENT