With over 21 distinct 3D models in total, DPI offers both active and passive, full resolution 3D solutions with sufficient lumens, native resolution and contrast to suit any application.

DPI’s 3D products have recently found their way into a diversity of applications, including medical imaging, product design, immersive visualisation, theme park entertainment and elite home cinema.

Inspired by this multi-market success, DPI’s engineers have focused specifically on expanding the performance and capabilities of the 3D product line for both Titan and Lighting 3D displays:

• MultiBlend – DPI’s four side image blend technology. MultiBlend supports the tiling of multiple projectors to create screens of nearly any resolution and aspect ratio. DPI’s MultiBlend technology provides an unprecedented 16 bit-per-color gray-scale resolution, ensuring blends are smooth, seamless and invisible.

• Silent operation – All single and dual-lamp Titan 3D models have received major enhancements in thermal management. This results in projectors that perform at a fraction of the noise level of the prior models, while actually enhancing the thermal performance of the chassis.

• Dual-pipe connectivity – 3D sources and formats come in a variety of standards. One sends the left eye and right eye content down two parallel cables. With this new connectivity, dual-pipe sources can now be input directly to the 3D projector.

• Ultra-high bandwidth capability – The electronics in DP’s TIitan and Lightning 3D displays accept sources running at up to 144 Hz with up to 12 bits greyscale resolution per colour and directly displays these sources.

• On-screen display for all 3D frame rates – The OSD for the Titan 3D and Lightning 3D is now visible as an overlay on all 2D and 3D sources – even those running at 120 Hz. This makes optimisng setup for any source easier than ever.

• Dual-flash processing for all inputs – DPI’s dual-flash processing technology allows 60 Hz 3D sources to be frame doubled and displayed at 120 Hz on screen. The doubled frames are also interleaved to assure smooth presentation with maximum 3D separation and no flicker.

• Triple-flash processing for all Inputs – In applications where 1080-24p 3D content is to be displayed (24 frames for the left eye, 24 frames for the right eye), Triple-flash is applied. In short, each of the 24 frames of the left and right content are tripled, such that 72 frames per eye, or 144 frames in total, are presented to the screen every second.

• FastFrame for all inputs – Exclusive to DPI, this technology reduces motion artifacts associated with rapidly moving content, such as what may be seen when viewing sporting events, participating in video games or in fast jet simulation. With FastFrame properly set, moving edge sharpness is dramatically enhanced and motion blur reduced, if not eliminated.

• Plug and play connectivity with the mainstream 3D standards defined in the HDMI 1.4 addendum – As of July 2010, all of DP’s Titan and Lightning 3D systems will offer plug and play connectivity with the four primary consumer 3D standards, including “Frame Packed” (3D Blu-ray).

DPI will be demonstrating a variety of 3D products and applications at InfoComm 2010 in Las Vegas, Nevada.