Smart home meets smart electricity
Peak electricity demand is a huge problem across the globe. Stuart Corner looks at one solution for consumers that might be making its way into Australian homes via smart home technology.
There has to be sufficient electrical capacity in the system to meet a peak demand that likely lasts for only a small percentage of the day and, at worst, only a few hours each year. Massive investment is needed to build the generating and transmission capacity to meet these demand peaks: capacity that is underused and not earning revenue for much of the time.
ADVERTISEMENT
Power utilities have for years deployed solutions to reduce peak demand and spread the load more evenly, especially over a 24-hour period. These include lower off-peak pricing for devices such as water heaters that can be run at night and store sufficient hot water for the day’s needs.
On the consumer side, smart home technologies are giving home owners much more flexible and granular control over their power consumption, enabling them to take greater advantage of off-peak pricing.
For example, LG Electronics claims US proof-of-concept trials of its Home Energy Management System (HEMS) “demonstrated 9-11% seasonal energy savings, and increased savings up to approximately 35% when integrated with solar and battery systems.”
LG Electronics Australia recently announced (12 May 2026) a pilot project with home builder Greater Homes Australia that will combine modular housing and HEMS to determine, among other objectives, if similar results could be obtained in Australia.
A more sophisticated method of reducing peak power consumption than simply having smart home devices is demand side response (DSR), where customers adjust their power consumption in response to requests or price incentives from the supplier.
Electricity utilities have been practising manually implemented DSR for many years, but in the early 2000s, Open Automated Demand Response (OpenADR) technology was developed at the Lawrence Berkeley National Laboratory in the US to automate this process. Today, it is widely used for large, industrial electricity consumers, but has only recently started to make headway in the consumer market.
Now, smart home technology is being combined with OpenADR to give electricity suppliers automated and device-specific control of domestic consumption, and vice versa.
On 11 May 2026, the body responsible for OpenADR, the OpenADR Alliance, and the Connectivity Standards Alliance (CSA), the body responsible for the Matter smart home technology, announced plans to collaborate on technologies to enable automated management of electricity consumption between suppliers and domestic consumers.
The announcement from OpenADR and the CSA said integration of OpenADR with Matter would: “Make it easier to turn connected homes into active participants for a smarter, more resilient energy future… enable our mutual members to accelerate the adoption of grid-connected residential energy management solutions… and address a growing need for seamless communication between smart home devices and the energy grid.”
Elaborating on this claim, the OpenADR Alliance said its collaboration with CSA would enable manufacturers to save go-to-market time and up-front investment, utilities to gain a standardised, scalable mechanism for demand response and consumers to benefit through bill credits and additional incentives.
The collaboration will be based on the latest version of OpenADR, OpenADR 3.0, announced in November 2025. That announcement said ADR 3.0 would enable device and equipment manufacturers to add new functionality more easily into customer products, including smart thermostats, electric vehicle (EV) charging stations, energy storage and control systems.
It quoted Lawrence Berkeley National Laboratory scientist, Bruce Nordman, saying “OpenADR 3.0 is so easy to implement that it can readily be put into any customer device (even a WiFi light bulb) for receipt of grid signals, and… also supports two mechanisms for capacity management between the grid and the customer.”
And there is considerable potential for its application in Australia. Rooftop solar and home batteries are widespread and making households suppliers as well as consumers of electricity.
A typical home EV charger uses 7kW of power (equivalent to a large oven and an air conditioner running simultaneously) and a typical EV needs about an hour of charging for 40km of travel.
And, in some places, consumer participation may not be an option. The announcement said some regulatory bodies had already signalled interest in mandating OpenADR 3.0.
Connected Technology Alliance (CTA) program director, Security Labelling Scheme for Smart Devices, Frank Zeichner, suggested any mandated implementation of OpenADR in Australia would likely come from State or Federal governments.
Side note: Zeichner was formerly chief executive of the IoT Alliance Australia, which has now become the CTA. It is focused on developing the labelling scheme that will indicate the security level of smart devices for consumers.
“Governments are way more interventionist. They are managing the market, and interoperability is really key, and they are managing the shift from coal to renewables. They’re trying to make sure there’s a way of shifting demand really efficiently and competitively,” Frank explains.
“Where it’s been the slowest, and the hardest to do is in the distributed energy grid, which is home networks connected in and aggregated. That’s the place that’s least regulated right now, and often those in interconnections are not done by the energy authorities, they’re done by independent aggregators.”
However, in Australia, the LG and Greater Homes pilot will use only customer-side energy management. A spokeswoman told Connected: “Although LG does plan to work with utility providers to manage/monitor household energy supplies, this would be much further down the line and contingent upon the results of this pilot, which is running until the end of 2026.”
At present, LG’s technology does not have the capability to support OpenADR. The LG Home Energy Management System is based on the Homey Pro (developed by Dutch company, Homey, which LG acquired in 2024). Although this claims to be “the world’s most advanced smart home hub,” it does not support OpenADR, but it does support Matter, so the Matter/OpenADR integration could enable a Homey Pro smart home hub to be used for demand side response electricity consumption management.
Zeichner suggests that the first organisations to capitalise on the potential of Matter/OpenADR integration could be intermediaries between electricity retailers and consumers.
“Energy retailers are trying to grapple with how to manage local distributed energy resources, because until now, they have known nothing about what’s happening in the home. They don’t know how people are using electricity… People are getting smart meters, but these are not being put in by [energy retailers]. So, the data is going to the people who put in the smart meters: the solar battery owners and the inverter owners. They are sharing with aggregators, or in some cases with the energy authorities, but they’re the ones who are actually putting these in.”
He said it was absolutely possible new entities could emerge that would capitalise on this OpenADR/Matter integration to become intermediates between smart homes that have solar, batteries, EVs, etc. and the energy retailers.
For integrators, the convergence of Matter and OpenADR could represent a significant new opportunity. As energy management becomes increasingly intertwined with smart home systems, integrators may find themselves at the centre of connecting these larger devices into platforms capable of responding intelligently to grid demands.
Whether driven by consumer demand, retailer incentives or future government mandates, the ability to design, install and manage energy-aware smart homes could become as important as traditional automation and entertainment systems, creating new service offerings and revenue streams for the channel.
-
ADVERTISEMENT
-
ADVERTISEMENT
-
ADVERTISEMENT
-
ADVERTISEMENT
