Procella Audio P10 active subwoofer upgraded
The new custom-made Italian pro-audio subwoofer driver improves the audible sound quality of the P10 and enables it to produce even greater peak output levels. The speaker’s design and cosmetics have also been improved, with a new dual grille design and a reveal line that frames the cabinet’s front baffle.
Manufactured for Procella by a leading Italian pro audio manufacturer, the new long-throw 10 inch woofer has a 2.5 inch voice coil and uses high-efficiency Neodymium magnets, producing a very high level of output, with increased peak capability, in comparison to the original P10. Designed for small to medium sized rooms up to about 1,750 cubic feet when used singly, the P10 active subwoofer produces cinema impact from a remarkably compact heavily-braced, sealed-box cabinet design enclosure.
Wide and shallow in design to allow for placement against walls or built into walls, its slim profile is only 180mm deep. Each of its dual 10 inch subwoofer drivers is driven by its own 350Wonboard amplifier, enabling the subwoofer to produce 119dB of output at 50Hz, with useful in-room low frequency extension to 20Hz. Integral 28bit/56 bit ADI Sigma DSP control tunes the subwoofer and optimizes in-room response by compensating for room location boundary conditions. Four pre-sets are provided, improving low frequency performance for free-standing placement, corner placement, location against a wall and mounting in a baffle wall.
ADVERTISEMENT
“Much as we recently improved the P15 subwoofer with a newly designed driver, the P10 now has better performance than its predecessor, with even greater dynamic output. In addition, we’ve given it a new look that shares design elements with the new P610 screen speaker and P10Si balancing subwoofer. The new driver brings the sonic quality of the P10 even closer to the flagship P18, making the P10 the reference standard for high quality low frequency reproduction in smaller rooms,” says Procella Audio U.S.-based principal Chuck Back.
“This matches the sonic signature of all of our subwoofers to an even finer degree, meaning that users need simply to select the model or models that fit their room and budgetary requirements.”
The P10 upgrade is designed by Procella founding partner Anders Uggelberg, a THX trained and certified cinema designer with over 300 cinema and professional studio designs to his credit. Each Procella Audio speaker model is designed to provide pro audio accuracy and dynamic range for the finest home theatres. High output at low frequencies is assured by active dual drive, dual amp subwoofers that utilise very high quality pro audio woofer drivers in combination with onboard high-power amplifiers and DSP control.
-
ADVERTISEMENT
-
ADVERTISEMENT
-
ADVERTISEMENT
-
ADVERTISEMENT